Yayınlar (SCI, SCI-E, ESCI)

2017 Yılı İnşaat Mühendisliği SCI/SCI-E / ESCI Yayınları

Yayli, M. Ö.(2017). “A compact analytical method for vibration of micro-sized beams with different boundary conditions”, Mechanics of Advanced Materials and Structures, ISSN: 1537-6494, 24(6), 496-508.

YAZICI, Ş., Mardani-Mardani, A., & Tuyan, M. (2017). Properties of self-consolidating concrete incorporating coarse recycled concrete aggregate. CEMENT WAPNO BETON, 22(2), 168-+.

Mardani-Aghabaglou, A., Son, A. E., Felekoglu, B., & Ramyar, K. (2017). EFFECT OF CEMENT FINENESS ON PROPERTIES OF CEMENTITIOUS MATERIALS CONTAINING HIGH RANGE WATER REDUCING ADMIXTURE. Journal of Green Building, 12(1), 142-167.

Yüksel, C., Mardani-Aghabaglou, A., Beglarigale, A., Yazıcı, H., Ramyar, K., Andiç-Çakır, Ö. (2017). Bazalt ve Atık Cam Agregalı Betonlarda Alkali-Silis Reaksiyonu Genleşmeleri ve Alkali Sızıntısı Seviyeleri, İMO Teknik Dergi, 28(2), 7865-7882, Yazı 477.

Yazici, Ş., & Mardani-Aghabaglou, A. (2017). Effect of aggregate grain size distribution on properties of permeable concrete. Journal of Fundamental and Applied Sciences, 9(1), 323-338.

Mardani-Aghabaglou, A., Felekoğlu, B., Ramyar, K., Effect of cement C3A content on properties of cementitious systems containing high range water-reducing admixture, Journal of Materials in Civil Engineering (ASCE), 29(8).

Unsever, Y. S., Matsumoto, T., Esashi, K., & Kobayashi, S. (2017). Behaviour of model pile foundations under dynamic loads in saturated sand. Bulletin of Earthquake Engineering, 15(4), 1355–1373.

Yayli, M. Ö. (2017). Buckling analysis of a cantilever single-walled carbon nanotube embedded in an elastic medium with an attached spring. IET Micro & Nano Letters, 12(4), 255 – 259.


Mardani-Aghabaglou, A., Beglarigale, A., Halit Yazıcı, H., Ramyar, K., Transport properties and freeze-thaw resistance of mortar mixtures containing recycled concrete and glass aggregates, European Journal of Environmental and Civil Engineering. Accepted, in press.

Kalipcilar, I., Mardani-Aghabaglou, A., Sezer, A., Altun, S., & Sezer, G. I. Sustainability of cement-stabilised clay: sulfate resistance. In Proceedings of the Institution of Civil Engineers-Engineering Sustainability. Thomas Telford Ltd.

Yayli, M. Ö. “An efficient solution method for the longitudinal vibration of nanorods with arbitrary boundary conditions via a hardening nonlocal approach”, Journal of Vibration and Control, ISSN: 1077-5463, DOI: 10.1177/1077546316684042, in Press.

2016 Yılı İnşaat Mühendisliği SCI/SCI-E Yayınları

Akpınar, A., Bingölbali, B., & Van Vledder, G. P. (2016). Wind and wave characteristics in the Black Sea based on the SWAN wave model forced with the CFSR winds. Ocean Engineering, 126, 276-298.

Akpınar, A., & Bingölbali, B. (2016). Long-term variations of wind and wave conditions in the coastal regions of the Black Sea. Natural Hazards, 84(1), 69–92.

Akpinar, A., & de León, S. P. (2016). An assessment of the wind re-analyses in the modelling of an extreme sea state in the Black Sea. Dynamics of Atmospheres and Oceans, 73, 61-75.

Soyarslan, C., Turtuk, I. C., Deliktas, B., & Bargmann, S. (2016). A Thermomechanically Consistent Constitutive Theory for Modeling Micro-Void and/or Micro-Crack Driven Failure in Metals at Finite Strains. International Journal of Applied Mechanics, 8(01), 1650009.

Türtük, İ. C., & Deliktaş, B. (2016). Coupled porous plasticity–Continuum damage mechanics approaches for modelling temperature driven ductile-to-brittle transition fracture in ferritic steels. International Journal of Plasticity, 77, 246-261.

Cakir, F., Ergen, Y. B., Uysal, H., & Dogangun, A. (2016). Influence of modified intended use on the seismic behavior of historical himis structures. Earthquakes and Structures, 10(4), 893-911.

Korkmaz, S., Pekkan, E., & Güney, Y. (2016). Transient Analysis with MODFLOW for Developing Water-Diversion Function. Journal of Hydrologic Engineering, 21(6), 05016009.

Livaoğlu, R., Baştürk, M. H., Doğangün, A., & Serhatoğlu, C. (2016). Effect of geometric properties on dynamic behavior of historic masonry minaret. KSCE Journal of Civil Engineering, 20(6), 2392–2402.

Livaoglu, R., & Durmuş, A. (2016). A simplified approximation for seismic analysis of silo–bulk material system. Bulletin of Earthquake Engineering, 14(3), 863-887.

Yazici, Ş., Mardani-Aghabaglou, A. (2016). EFFECT OF AGGREGATE GRAIN SIZE DISTRIBUTION ON PROPERTIES OF PERMEABLE CONCRETE. Journal of Fundamental and Applied Sciences, 9(1), 323-338.

Mardani-Aghabaglou, A., Yüksel, C., Hosseinnezhad, H., Ramyar, K. (2016). Performance of steel micro fiber reinforced mortar mixtures containing plain, binary and ternary cementitious systems, Journal of Green Building, 11(4), 109-130.

Mardani-Aghabaglou, A., Beglarigale, A., Yazıcı, H., Ramyar,K. (2016). Micro-structural analyses of recycled aggregate-bearing mortar mixture, ACI Materials Journal, 113(6), 769-780.

Mardani-Aghabaglou, A., Boyacı, O. C., Hosseinnezhad, H., Felekoğlu, B., & Ramyar, K. (2016). Effect of gypsum type on properties of cementitious materials containing high range water reducing admixture. Cement and Concrete Composites, 68, 15-26.

Sezer, A., Mardani-Aghabaglou, A., Boz, A., & Tanrınıan, N. (2016). An Investigation into Strength and Permittivity of Compacted Sand-Clay Mixtures by Partial Replacement of Water with Lignosulfonate. Acta Physica Polonica A, 130(1), 23-27.

Kalipcilar, I., Mardani-Aghabaglou, A., Sezer, G. I., Altun, S., & Sezer, A. (2016). Assessment of the effect of sulfate attack on cement stabilized montmorillonite. Geomechanics and Engineering, 10(6), 807-826.

Yüksel, C., Mardani-Aghabaglou, A., Beglarigale, A., Ramyar, K., & Andiç-Çakır, Ö. (2016). Influence of water/powder ratio and powder type on alkali–silica reactivity and transport properties of self-consolidating concrete. Materials and Structures, 49(1-2), 289-299.

Özen, S., Şengül, C., Erenoğlu, T., Çolak, Ü., Reyhancan, İ. A., & Taşdemi̇r, M. A. (2016). Properties of Heavyweight Concrete for Structural and Radiation Shielding Purposes. Arabian Journal for Science and Engineering, 41(4), 1573-1584.

Yaylı, M. Ö., Kandemir, S. Y., & Çerçevik, A. E. (2016). A practical method for calculating eigenfrequencies of a cantilever microbeam with the attached tip mass. Journal of Vibroengineering, 18(5), 3070-3077.

Yayli, M. Ö. (2016). Buckling analysis of a microbeam embedded in an elastic medium with deformable boundary conditions. Micro & Nano Letters, 11(11), 741-745.

Yayli, M. Ö. (2016). A compact analytical method for vibration analysis of single-walled carbon nanotubes with restrained boundary conditions. Journal of Vibration and Control, 22(10), 2542-2555.

2015 Yılı İnşaat Mühendisliği SCI/SCI-E Yayınları

Turan, A., Naggar H., Livaoğlu, R., Evaluation of Liquefaction in Ercis Plain during Van Earthquake, International Journal of Geohazards and Environment 1(2): 63-75, (2015).

Durmuş A.,Livaoğlu, R., A simplified 3 D.O.F. model of a fem model for seismic analysis of a silo containing elastic material accounting for soil-structure interaction,Soil Dynamics and Earthquake Engineering,7,pp.1-14 (2015)

Türkeli E, Livaoğlu R, Doğangün A, (2015), Dynamic response of traditional and buttressed reinforced concrete minarets, Engineering Failure Analysis, 49: 31-48. (SCIE)

Livaoğlu, R., Durmuş A., Investigation of wall flexibility effects on seismic behavior of cylindrical silos,Structural Engineering and Mechanics: An International Journal, Vol. 53, No. 1 (2015) 159-172.

Eryılmaz, G.T., Korkmaz, S. (2015). “Determination of Hydraulic Conductivity Using Analytical and Numerical Methods Applied to Well and Aquifer Tests”, Technical Journal of Turkish Chamber of Civil Engineers, 26 (1), 6969-6991.

Van Vledder, G.Ph., Akpınar, A., Wave model predictions in the Black Sea: Sensitivity to wind fields. Applied Ocean Research, 53 (2015) 161-178.


2014 Yılı İnşaat Mühendisliği SCI/SCI-E Yayınları

Cakir F, Seker B.S, Durmus A, Dogangun A, Uysal H, (2014), Seismic assessment of a historical masonry mosque by experimental tests and finite element analyses, KSCE Journal of Civil Engineering, (Accepted for Publication). (SCIE)

Cakır F, Seker B. S, Dogangun A, (2014), Assessment of structural performance of historical Ishan Church with experimental tests and numerical modeling, The Journal Gradevinar (Eng. Civil Engineer), 66:5, 433-443. (SCIE)

Seker B.S, Cakir F, Dogangun A, Uysal H, (2014), “Investigation of a masonry domed mosque by experimental tests and numerical analyses”,Earthquakes and Structures, 6:4, 335 350. (SCIE)

Livaoğlu, R.,The numerical and empirical evaluation of chimneys considering soil structure interaction and high-temperature effects, Soil Dynamics and Earthquake Engineering, V.66, (2014), Pages 178–190

Uzlu, E., Kankal, M., Akpınar, A., Dede, T., Estimates of energy consumption in Turkey using neural networks with the teaching-learning-based optimization algorithm. Energy, 75 (2014) 295-303. (SCI)

Uzlu, E., Akpınar, A., Öztürk, H.T., Nacar, S., Kankal, M., Estimates of hydroelectric generation using neural networks with artificial bee colony algorithm for Turkey. Energy, 69 (2014) 638-647. (SCI)

Akpınar, A., Özger, M., Bekiroğlu, S., Kömürcü, M.İ., Performance Evaluation of Parametric Models in the Hindcasting of Wave Parameters along the South Coast of Black Sea, Indian Journal of Geo-Marine Sciences, 43 (2014) 899-914 . (SCI-E, C Sınıfı)

Anasayfaya Dön

İçerik Ekleme Tarihi : [31-Oca-2021]

İçerik Görüntüleme : [179]